Unpacking Shipping Carton - VeriFone V200t Installation Manual

Table 3 Mounting Methods and Protection Measures
Method Cashier
Countertop with No Action
Swivel Stand Needed.
Countertop with- Position the
out stand PED to face
away from the
cashier. Use
signage to block
cashier's view.
NOTE
Unpacking
Shipping Carton
The following table describes the two preferred mounting methods and the
recommended measures to protect from PIN capture in four observation corridors:
Customer in Queue
Customer positions
PED
Position the PED
between customer and
the next in queue.
Install the optional pri-
vacy shield.
A swivel stand gives the cardholder freedom to position the V200t to optimize
their viewing angle. If you are installing a swivel stand, you must include prompts
in your application directing the cardholder to position the V200t strategically to
restrict the view of other customers.
Additionally, you may wish to implement the following to further increase security
during PIN entry.
•
Offer PIN security literature at the point of sale
•
Use signage to limit the view of the V200t to just that of the cardholder.
Carefully inspect the shipping carton and its contents for possible tampering or
damage.
1
Remove the V200t unit from the shipping carton. The standard package
contains the PIN pad, power pack, telephone cable, and printer paper roll.
Refer to Accessories and Documentation
accessories.
Figure 4 V200t Box Contents
2
Remove any protective plastic wrap and place the unit on a table or
countertop.
Observation Corridors
Customers Elsewhere
No action needed
Privacy Shield Installed
for more information on related
S

Unpacking Shipping Carton

On-site Cameras
Do not install within
view of cameras
Do not install within
view of cameras
V200 I G
T NSTALLATION UIDE
ETUP
15