Page 1
Verifone V240m Payment Terminal Getting Started Guide...
Page 2
Sale Screen is displayed. You are now ready to take payments. Your V240m terminal is pre-configured to use either the 3G mobile network or Bluetooth for communications (If Bluetooth has been ordered) This will allow you to authorise sales immediately.
Page 3
ADDING WIFI Press the main logo at the top of the screen. On Main Menu (1/2), press the down arrow. Press 1 on the keypad or select Configuration on screen. Enter the supervisor password (default 1234). Press 1 on the keypad You should now see the Communication Panel.
PERFORMING A SALE While the terminal is on the main screen, key in the amount for the sale and press [ENTER] key If tip is configured, select the tip value. Tip screens will only be shown if tip is enabled. Total amount = sale amount + tip amount 10.
Page 5
PERFORMING A REFUND Touch the main logo at the top of the screen. This will show the main menu, select Onetime Transactions then Select Refund Enter the Supervisor password Enter the refund amount and press [ENTER] key Present, insert or swipe the payment card, or, key enter the card number for MOTO.
Need help?
Do you have a question about the V240M and is the answer not in the manual?
Questions and answers