Table of Contents

Advertisement

V200t
Installation Guide
Verifone Part Number DOC470-003-EN-A, Revision A

Advertisement

Table of Contents
loading

Summary of Contents for VeriFone V200t

  • Page 1 V200t Installation Guide Verifone Part Number DOC470-003-EN-A, Revision A...
  • Page 2 Verifone, Inc. The information contained in this document is subject to change without notice. Although Verifone has attempted to ensure the accuracy of the contents of this document, this document may include errors or omissions. The examples and sample programs are for illustration only and may not be suited for your purpose.
  • Page 3: Table Of Contents

    Connecting ECRs to the V200t ........
  • Page 4 V200t Terminal ........
  • Page 5: Preface

    This guide is organized as follows: Chapter 1, Overview. Provides an overview of a V200t device. Chapter 2, Setup. Explains how to set up and install the V200t and establish connections with other devices. Chapter 3, Specifications. Discusses the power requirements and dimensions of V200t.
  • Page 6: Acronym Definitions

    REFACE Guide Conventions Table 1 Document Conventions Convention Meaning Example The pencil icon is used to RS-232-type devices do not work NOTE highlight important information. on the communication port. The caution symbol indicates The unit is not waterproof or CAUTION hardware or software failure, or dustproof, and is intended for loss of data.
  • Page 7 REFACE Guide Conventions Table 2 Acronym Definitions (continued) Acronym Definitions Universal Serial Bus Verifone Part Number V200 NSTALLATION UIDE...
  • Page 8 REFACE Guide Conventions V200 NSTALLATION UIDE...
  • Page 9: Hapter

    The V200t offers several communication options, enhanced display, increased processing power and two USB peripheral ports. The V200t terminal uses a robust, sleek, and highly functional design. With modular communication options, enhanced color display, increased processing power, expanded memory, and two USB peripheral ports.
  • Page 10: Rear Compartments

    VERVIEW V200t Terminal • Integrated thermal printer Rear Compartments After removing the rear covers, the underside of the V200t shows the following: Figure 2 V200t Cards Compartment • Dual MSAM slots • Dual SIM slots • Micro SD Card slot •...
  • Page 11: Features And Benefits

    Meets ISO and ANSI standards for PIN encryption, key management, and MAC. • The VeriShield security architecture meets published specifications for PCI PTS POI and provides sophisticated file authentication to prevent execution of unauthorized software. • Key injection simplified and secured with Verifone’s SecureKit key loading software. V200 NSTALLATION UIDE...
  • Page 12: Countertop Performance In A Hand-Over Design

    VERVIEW Features and Benefits Countertop • The 32-bit processing and multi-tasking capabilities ensures fast processing of Performance in a payment, payment-related, and value-added applications. Hand-Over Design • Exceptional display and printer graphics-handling capabilities that quickly render logos, graphical fonts, and character-based languages. V200 NSTALLATION UIDE...
  • Page 13: Setup Selecting Location

    • A flat support surface such as a countertop or a table, • Near a power outlet and the terminal or computer that connects to the V200t. WARNING For safety, do not string cables or cords across a walkway. V200...
  • Page 14: Environmental Factors

    • Do not use the V200t outdoors. CAUTION The V200t is not waterproof or dustproof and is intended for indoor use only. Any damage to the unit from exposure to rain or dust can void any warranty. Electrical •...
  • Page 15: Unpacking Shipping Carton

    • Offer PIN security literature at the point of sale • Use signage to limit the view of the V200t to just that of the cardholder. Unpacking Carefully inspect the shipping carton and its contents for possible tampering or Shipping Carton damage.
  • Page 16: Installing Or Replacing Msam, Micro Sd And Sim Cards

    Remove the clear protective film from the display. Replace all the packing materials, close the lid, and save the carton for repacking or moving the V200t unit in the future. Do not use a unit that has been tampered with or otherwise damaged. This unit WARNING comes equipped with tamper-evident label.
  • Page 17: Changing Or Installing Msams

    ETUP Installing or Replacing MSAM, Micro SD and SIM Cards Changing or To change or install MSAM cards: Installing MSAMs Use steps 1 to 3 of Opening Card Compartment to get to the MSAM cardholder. Remove the old card, if any, and insert the MSAM card carefully into the slot (with the gold contacts facing downward) until fully inserted.
  • Page 18: Changing Or Installing Sim Cards (For V200T Plus Only)

    If you are finished replacing or inserting cards, replace the battery and lock the rear cover back in place. Changing or To change or install SIM cards in V200t Plus units: Installing SIM Cards Use steps 1 to 3 of Opening Card Compartment to get to the SIM cardholder.
  • Page 19: Establishing Communication

    ETUP Establishing Communication Establishing You can connect the V200t to your network by using the following options: Communication • Connecting by Telephone Line • Connecting by Ethernet Cable. Connecting by Connect the telephone cord to the communication port on the terminal, then route...
  • Page 20: Loading Printer Paper

    Paper install paper in the printer. The V200t uses a roll of 57 mm wide x 40 mm, single-ply, thermal sensitive paper. A pink out-of-paper indicator line appears on the edge of the paper before the end of the roll. After this line appears, there is enough paper remaining on the roll to conclude at least one more transaction.
  • Page 21: Connecting Optional Devices

    Different terminals support different devices, so for more information about optional devices, please contact your Verifone distributor. Optional Device You can connect several devices to your V200t. You can use the following cables Connections for different types of device connections: •...
  • Page 22: Connecting The V200T To A Pc

    ETUP Connecting Optional Devices Connecting the The following illustration shows how to connect the V200t to a computer via the V200t to a PC Multi-Communication port using the RJ9 to DB9 cable (VPN CBL000-051-02-A) Figure 13 Sample PC Connection Connecting ECRs to The V200t supports electronic cash registers (ECRs).
  • Page 23: Connecting Power Supply

    Power Supply Verifone ships the power supply unit with the terminal as required. Contact your Verifone representative If you have changed the context in which the terminal is used or have questions about which power supply should be used. Using an incorrectly rated power supply can damage the unit or cause it not to CAUTION work properly.
  • Page 24: Smart Card Reader

    Premature removal can void the transaction. Magnetic Stripe The V200t has a magnetic card reader that uses a triple track stripe reader. This Card Reader Use gives the unit greater reliability over a wide range of swipe speeds and operating environments.
  • Page 25: Contactless Transactions

    If any device is found in tamper state, please remove it immediately from service. NOTE Keep it available for potential forensic investigation, and notify your company security officer and your local Verifone representative or service provider. For more information on contacting Verifone, refer to Service and Support.
  • Page 26 ETUP Periodic Inspection V200 NSTALLATION UIDE...
  • Page 27: Specifications

    HAPTER Specifications This chapter discusses power requirements, dimensions, and other specifications of the V200t terminal. V200t Terminal Refer to the following technical information for the V200t terminal: Unit Power • 8 V DC, 2.25 A Operating Power: Requirements Temperature •...
  • Page 28: Primary Smart Card

    Two Security Access Module (SIM) slots Connectivity • • GPRS/GSM Class 10 • GPRS DL 85.6 kbps, UL 42.8 kbps • GPRS (V200t Plus Only) • GPRS/GSM Class 10 • UMTS/HSPA DL 7.2Mbps, UL 5.7Mbps • Bluetooth • BT class 1.5 with up to 100m range as a goal (line of sight) •...
  • Page 29: Troubleshooting Guidelines

    HAPTER Troubleshooting Guidelines This chapter lists typical malfunctions that may occur while operating a V200t device and the appropriate corrective action. If the problem persists – even after performing the outlined guidelines, or if the problem is not described, contact your local Verifone representative for assistance.
  • Page 30 ROUBLESHOOTING UIDELINES Transactions Fail To Process • If the problem persists, contact your local Verifone representative. Check Smart Card Reader • Perform a test transaction using several different smart cards to ensure the problem is not a defective card. •...
  • Page 31: Hapter

    Never use thinner, trichloroethylene, or ketone-based solvents – they can CAUTION deteriorate plastic or rubber parts. Because the V200t can be damaged by liquid, do not spray cleaners or other solutions directly onto the keypad or display. Always apply the cleaner to a cloth before cleaning the device.
  • Page 32 You will be issued MRA number(s) and the fax will be returned to you. NOTE One MRA number must be issued for each V200t unit you return to Verifone, even if you are returning several of the same model. Describe the problem(s).
  • Page 33: Accessories And Documentation

    Monday - Friday, 7 A.M. - 5 P.M., MST • International – Contact your Verifone representative Cables Contact your local Verifone distributor to determine which cable fits your needs. CBL159-312-01-A LAN cable for Ethernet connections (CAT5, 2.0 m). CBL000-051-02-A RJ9 to DB9 cable...
  • Page 34 ERVICE AND UPPORT Accessories and Documentation V200 NSTALLATION UIDE...
  • Page 35: A P P En Di X A Caution And Warning Messages

    être endommagé, en label. If a label or component aviser immédiatement la compagnie maritime appears damaged, immediately et votre représentant Verifone ou prestataire notify the shipping company and de services. your Verifone representative or service provider.
  • Page 36 Electrostatic discharges décharges électrostatiques. Les décharges can damage the equipment. électrostatiques peuvent endommager le Verifone recommends using a matériel. Verifone recommande d'utiliser un grounded anti-static wrist strap. bracelet anti-statique à la terre. Caution Setup page...
  • Page 37 Caution and Warning Messages V200 NSTALLATION UIDE...
  • Page 38 Verifone, Inc. 1-800-Verifone www.verifone.com V200t Installation Guide Verifone Part Number DOC470-003-EN-A, Revision A...

Table of Contents