Cabletron Systems 9F241-12 Appendix page 10

9F241-12 Module Specific Information
Assigning an FNB Ring to a Module's M-Port
To assign an FNB ring to a module's M-port:
1. Use the arrow keys to highlight the PATH field next to the desired port.
2. Press the SPACE BAR to toggle to the desired ring (either MAC-1 or MAC-2).
3. Press the Return key. Repeat steps 1 - 3 to assign an FNB ring to other M-
ports.
4. Use the arrow keys to highlight SAVE at the bottom of the screen and then
press the Return key.
When the message "SAVED OK" appears, the edits you have made are saved.
If you exit without saving, the message "NOT SAVED -- PRESS SAVE TO
KEEP CHANGES" appears. If you exit without saving, your edits will be lost.
5. Use the arrow keys to highlight RETURN and then press the Return key.
8