Cabletron Systems MicroMMAC-22T User Manual page 76

MONITORING AND TROUBLESHOOTING
Message
uMMAC-T Port xx
Removed
Stack x Port xx
Removed
Ring Port xx
wrapped
Eagle
Reinserting
Fault Recovery
Oscillation
Ring Port xx
Unwrapped
Speed Fault
uMMAC-T Port xx
Speed Fault
Stack x Port xx
Ring Threshold:
Ring Purges
Ring Threshold:
AM errors
Ring Threshold:
Token errors
Ring Threshold:
Claim Token
Ring Threshold:
Lost Frames
Ring Threshold:
Frame Count
5-4
Table 5-3 Alarm Messages (Continued)
What It Means
A lobe port (number 1 to 24) on the MicroMMAC-T
has been disabled as a result of the beacon
recovery process.
A lobe port (number 1 to 24) on an STH hub
(number 2 to 5) has been disabled as a result of the
beacon recovery process.
A RI or RO port has autowrapped.
The Eagle Token Ring chip set is automatically
being reinserted.
The network has been in and out of a beaconing
state several times.
A RI or RO port is no longer autowrapped.
A uMMAC-T lobe port (number 1 to 24) detected a
speed fault error and is disabled.
An STH lobe port (number 1 to 24) detected a speed
fault error and is disabled.
The ring purge error count has exceeded the
threshold parameters set in an SNMP application for
the ring.
The active monitor error count has exceeded the
threshold parameters set in an SNMP application for
the ring.
The token error count has exceeded the threshold
parameters set in an SNMP application for the ring.
The claim token count has exceeded the threshold
parameters set in an SNMP application for the ring.
The lost frame count has exceeded the threshold
parameters set in an SNMP application for the ring.
The frame count has exceeded the threshold
parameters set in an SNMP application for the ring.