Table of Contents
Advertisement
SETTING SYSTEM PARAMETERS
6.1.2.8
Setting the MMAC IP Address
To set the MMAC IP Address:
1. Using the arrow keys, highlight the MMAC IP Address field.
2. Enter the address into the field. The format for this entry is
XXX.XXX.XXX, with values from 0-9.
3. Press Return.
6.1.2.9
Setting the Stats Polling Interval Time
To set the Stats Polling Interval Time:
1. Using the arrow keys, highlight the Stats Polling Interval Time field.
2. Enter the new time in one of these formats: HH:MM:SS or HHMMSS.
For example: 00:00:10 or 000010.
3. Press Return. If an invalid time is entered, the error message,
ILLEGAL TIME ENTERED, will appear in the upper left hand corner
of the screen.
6.1.2.10 Setting the Stats Polling Interval # of Packets
To set the Stats Polling Interval # of Packets:
1. Using the arrow keys, highlight the Stats Polling Interval # of
Packets field.
2. Enter the new value into the field.
3. Press Return. The number can be set anywhere from 0 to 999999999
packets.
6-6
Advertisement
Table of Contents
