Enabling And Disabling Individual Ethernet And Token Ring Ports; Attaching And Detaching Token Ring Boards; Changing The Password - Cabletron Systems IRM/LM User Manual

Local network management for cabletron systems

Table of Contents

USING OTHER AVAILABLE FUNCTIONS

13.4.5 Enabling and Disabling Individual Ethernet and

Token Ring Ports

You can turn individual ports connected to an individual board in the

MMAC on or off from the appropriate Port X Statistics Screen (Ethernet)

or the Token Ring Board X Status Screen.

To enable or disable an individual port from the Port X Statistics Screen

or the Token Ring Board X Status Screen:

1. Use the arrow keys to highlight the ENABLE PORT X or DISABLE

PORT X option at the bottom of the screen.

2. Press the shift and + key, or the - key, until the number of the board

you intend to enable or disable appears.

3. Press Return. The appropriate message, PORT X ON BOARD X

(ENABLED, DISABLED) BY IRM OPERATOR, will appear on the

second line of the screen.

13.5

ATTACHING AND DETACHING TOKEN RING

BOARDS

You can attach or detach the boards to the immediate left and right of the

board speciﬁed in the Token Ring Board X Status Screen. See Chapter 5

for more information on attaching and detaching boards.

1. Use the arrow keys to highlight the DETACH (ATTACH) BOARDS

1 & 2 option at the bottom of the screen.

2. Press Return. The appropriate message, BOARDS 1 AND 2

DETACHED (ATTACHED) BY IRM OPERATOR, will appear.

13.6

Refer to Cabletron Systems' Local Management for the MMAC (HUB)

Change Password Feature Instruction Sheet.

13-4

Table of Contents