Cabletron Systems IRM/LM User Manual page 74

PORT LINK STATUS OPTION
08/31/90 13:44:45
Slot 0 Slot 1
Port IRM TR_12
1 N/A
2 N/A
3 N/A
4 N/A
5
6
7
8
9
10
11
12
Total
ON: 4
MAIN ENABLE BOARD 0
DISABLE BOARD 0
There are three possible Link Status messages for Ethernet boards:
LNK Link OK (LNK) indicates that a link is established between
that applicable port on the module and the device at the
other end of the 10BASE-T Twisted Pair or Fiber Optic
segment.
N/LNK No Link (NLNK) indicates that either a link has not been
established between the applicable port on the module and
the device at the other end of the 10BASE-T Twisted Pair
or Fiber Optic segment, or that a 10BASE-T Twisted Pair
or Fiber Optic segment is not connected to the port.
N/A Not Available (N/A) indicates that this port is not a
10BASE-T Twisted Pair or Fiber Optic Link port.
There are four possible Link Status messages for Token Ring boards:
ENB A port is considered Enabled (ENB) if it has been enabled by
management, and there is no station linked to the port.
11-2
Link Status
Slot 2 Slot 3
TR_12
ENB INS
ENB INS
ENB INS
ENB INS
ENB INS
ENB INS
ENB INS
ENB INS
ENB INS
ENB INS
ENB INS
ENB INS
12 12
ENABLE ETHERNET
DISABLE ETHERNET
Figure 11-1 Link Status Screen
Last Reset: 08/31/90
Slot 4 Slot 5 Slot 6
ENABLE TOKEN RING
DISABLE TOKEN RING
13:37:20
Slot 7