Mmac Statistics Screen Fields - Cabletron Systems IRM/LM User Manual

STATISTICS SCREENS
5.1.1

MMAC Statistics Screen Fields

MMAC Name
Displays the user-defined name assigned to the IRM at the MMAC Board
Names Screen.
MMAC Address
Displays the Ethernet address of the MMAC.
MMAC Port Status - ON:xx OFF:xx
Displays the number of ports in the MMAC that are ON (enabled or
segmented) and the number of ports that are OFF (disabled). This number
includes Token Ring Station and Ring-in/Ring-out ports. (Each ring port
is counted separately.) For a port to be considered ON, it must be enabled
by management.
MMAC Total
The MMAC Total displays the number of good packets or collisions the
MMAC has processed, and also displays the number of times the MMAC
reached any alarm limit.
Packets Displays the total number of good packets the MMAC has
processed.
Colls. Displays the total number of collisions the MMAC has
processed.
Alarms Displays the total number of times that the MMAC reached
an MMAC, board, or port alarm limit.
Timer Statistics
Timer Statistics allow you to sample activity on the MMAC for a set time
period. You can set this time period at the Stats Polling Intervals display
on the System Parameter Screen. For example, if you set Time to 10
seconds, the figure under Elapsed - Packets will be the number of packets
that the MMAC processes during that 10 second interval.
5-2