Reset System Parameters Screen Fields - Cabletron Systems IRM/LM User Manual

SETTING SYSTEM PARAMETERS
6.1.1

Reset System Parameters Screen Fields

Unit Name:
Displays the user-defined name given to the MMAC. The MMAC Name
is the same name given to Board 0, the IRM, and the MMAC Board
Names Screen for the MMAC.
MMAC Address:
Displays the Ethernet address of the MMAC.
Current Date:
Displays the date to which the MMAC is set.
Current Time:
Displays the time entered at this field.
MMAC Limit:
Allows you to set the MMAC Alarm Limit on the MMAC. Refer to
Chapter 6, Setting Alarm Limits, for a description on setting the MMAC
Alarm Limit.
Audible Alarms:
Indicates whether a beep will sound when an error, alarm, or status
message appears on the screen of the terminal connected to the IRM's
Console port. YES indicates that a beep will be generated by the terminal
connected to the IRM's Console port when a message appears. NO
indicates that no sound will be generated. The default value for this field
is YES.
Segmented Port Alarms:
Indicates whether alarms for segmented ports will be generated and
recorded at the MMAC Main Screen. YES indicates that a message will
appear at the top of the MMAC Main Screen, listing which board and port
was segmented. NO indicates that no message will be generated. The
default for this field is NO.
Management Auto Send:
Indicates whether an MMAC' Management Packet will be generated
when Local Management gathers statistics. YES indicates that a
management packet will be generated when the MMAC has gathered
statistics. NO indicates that a management packet will not be generated
when the MMAC has gathered statistics. The default value for this field is
NO.
6-2