Table of Contents
Advertisement
SETTING SYSTEM PARAMETERS
From the Reset System Parameter Screen, you can set or change various
parameters for the terminal connected to the IRM's Console port.
6.1
RESET SYSTEM PARAMETERS SCREEN
The Reset System Parameters Screen allows you to alter Local
Management's system parameters that appear on the MMAC Main
Screen.
To access this screen:
1. Highlight the RESET SYSTEM PARAMETERS option at the
bottom of the MMAC Main Screen.
2. Press Return. The Reset System Parameters Screen, Figure 6-1, will
appear.
02/16/90
14:26:43
Unit Name: Tech Writing
Current Date: 07/15/89
Current Time: 14:28:20
MMAC Limit:
Audible Alarms:
Segmented Port Alarms:
Management Auto Send:
Screen Refresh Time:
Minimum Alarm Duration:
MMAC IP Address:
Stats. Polling Intervals
MAIN
SAVE
BOARD NAMES
RESET AUTO MODE BOARD 1
Figure 6-1 Reset System Parameters Screen
CHAPTER 6
RESET SYSTEM PARAMETERS
Packets/
Colls.
Within
1000
-C 00:00:10 DISABLED!
YES
NO
NO
10 seconds
10 seconds
0.0.0.0
-
Time: 00:00:20
BOARD LIMITS
RESET IRM COUNTERS
Last Reset: 02/16/90 08:10:11
MMAC Address: 00-00-1D-00-36-06
Auto
Shut-off
NO
# of Packets: 10000
CHANGE PASSWORD
CLEAR REDUNDANCY
Parts
ON
OFF
16
0
CABLE REDUNDANCY
RESTART IRM
6-1
Advertisement
Table of Contents
