USING OTHER AVAILABLE FUNCTIONS
Other functions available with Local Management include Restarting the
IRM, Resetting IRM Counters, and Enabling and Disabling Ports and
Boards.
13.1
RESTARTING THE IRM
The Restart IRM function allows you to reset all configurable variables
(except Redundancy) to the default values resident on your Local
Management firmware. With this command, you can reset configurable
variables to their defaults, or you can reset variables at the System
Parameters Screen.
Restart IRM Counters from the Reset System Parameters Screen as
follows:
1. Using the arrow keys, highlight the RESTART IRM option at the
bottom of the screen.
2. Press Return. The message, MULTI MEDIA ACCESS CENTER
RESTARTED, will appear, indicating that the IRM has been restarted.
13.2
RESETTING IRM COUNTERS
The Reset IRM Counters function allows you to reset all statistics
gathered by Local Management back to zero. After you have reset IRM
counters, Local Management starts gathering statistics again.
Reset IRM Counters from the Reset System Parameter Screen by:
1. Using the arrow keys, highlight the RESET IRM COUNTERS
option at the bottom of the screen.
2. Press Return. The message, ALL MMAC COUNTERS HAVE
BEEN RESET BY IRM OPERATOR, will appear indicating that the
IRM counters have been reset. A summary of statistical information
will be saved and can be accessed at the Previous Counters X Screen.
CHAPTER 13
13-1