Cabletron Systems IRM/LM User Manual page 64

USING THE REDUNDANCY FUNCTION
8. Press Return. The Retry Count text box will be highlighted.
9. Enter the new Retry Count. (Press the down arrow key to accept the
current Retry Count.)
10. Press Return. The ADD NEW POLL ADDR option will be
highlighted.
11. Press Return. The ADD NEW POLL ADDR text box will appear.
12. Enter the address of the MMAC you want to poll to establish the
redundant communication circuit.
13. Press Return. If you wish to add an additional MMAC address, press
Return again, and repeat steps 11 and 12.
14. Press the down arrow key. The text box under Board will be
highlighted.
15. Enter the Board number of the Primary port.
16. Press Return. (If you wish to delete a number you have entered, use
the appropriate arrow key.)
17. Enter the number of the Primary port.
18. Press Return. The text box under Status will be highlighted.
19. Press the down arrow key to accept the designation as the Primary
port. (If you wish to designate this Board/Port as Inactive (I) or Active
(A), enter the appropriate letter and Press Return. Remember that you
must have one Board/Port designated as the Primary.) The text block
under Board will be highlighted.
20. Enter the Board number of the Inactive port.
21. Press Return. The text box under Port will be highlighted.
22. Enter the number of the Inactive Port.
23. Press Return. The text box under Status will be highlighted.
8-4