PROAIM CINEMA Series Assembly Manual page 3


Then attach Middle Base Plate with Ronin
Plate (Not Included). Insert the bolts and
tighten them with help of allen key.

Now attach this Middle Base Plate with
Isolator Plate and
accurately with allen key, as shown in image.

Finally, you can mount Base Plate with
L-plate of your Isolator Arm
and mount your Gimbal.
Single Spring Set Setup
NOTE: Vibration Isolator can also be customized with Single Spring configuration for using with
lightweight setups from 15-30kg / 33-66lb.

Loosen the bolts from top and bottom of
Vibration Isolator.

Then remove bolts and one wire set from
Vibration Isolator plate.
tighten the bolts
(Not Included)
3