PROAIM CINEMA Series Assembly Manual page 2

Mitchell Isolator Setup

Attach Mitchell Vibration Isolator with plate
of your setup and tighten to secure it
properly.
NOTE: The isolator plate can be fixed both Over
Slung and Under
requirement.

Then loosen the bolts of Mitchell plate and
insert Castle Ring into it. Connect any Gimbal
Mount with Castle Ring as shown in the
image.
Isolator Base Plate Setup
NOTE: You can also attach only Vibration Isolator Plate by removing the Mitchell Plate.

Loosen bolts on Mitchell Plate with help of
allen key and remove the plate. Your
equipment will look as shown in image.

Turn Isolator upside-down & loosen the bolts
to remove Isolator with Base Plate.

Now loosen 4 corner bolts of Middle Base
Plate and remove Rods as shown in image.
Slung, as per your
2