KeysTRoKe
3. Calculate the Cutting Speed:
*
C
* Repeated presses of
starting with the entered Diameter.
FEED PER TOOTH (CHIP LOAD)
Feed per Tooth, or Chip Load, is the thickness of material
removed by each cutting surface. You can calculate Feed per
Tooth given values for Number of Teeth and Cutting Feed.
If the Cutting Feed is not known, the Feed per Tooth can be
calculated given values for Number of Teeth, Feed Rate and
RPM (Spindle Speed).
feed per Tooth – based on cutting Feed and # of Teeth
Calculate Feed per Tooth (Chip Load) with a Cutting Feed of
0.60 millimeters for 4 Teeth:
KeysTRoKe
OO
1. Enter the Cutting Feed:
. 6c
2. Enter the Number of Teeth:
4 #
3. Calculate the Feed per Tooth:
F
F
F
feed per Tooth – based on Feed rate, rPM and # of Teeth
Calculate Feed per Tooth (Chip Load) with a 325 millimeters per
minute Feed Rate, 4 Teeth and a Spindle Speed of 800 RPM:
will toggle through the inputs and outputs,
C
DIsPlay
CUT 25.
M/MIn
DIsPlay
$
CUT
0.6
MM/ReV
TeeTH
fPT 0.1500
TeeTH
$
CUT
0.6
MM/ReV
(cont'd)
U
'
G
ser
s
Uide
0.
$
4.
MM
$
4.
— 27