* Repeated presses of
starting with the entered Diameter.
FEED PEr TOOTH (cHIP lOaD)
Feed per Tooth, or Chip Load, is the thickness of material
removed by each cutting surface. You can calculate Feed per
Tooth given values for Number of Teeth and Cutting Feed.
If the Cutting Feed is not known, the Feed per Tooth can be
calculated given values for Number of Teeth, Feed Rate and
RPM (Spindle Speed).
feed per Tooth – based on cutting Feed and # of Teeth
Calculate Feed per Tooth (Chip Load) with a Cutting Feed of
0.024 Inch for 4 Teeth:
KeySTROKe
O O
1. Enter the Cutting Feed:
. 0 2 4 c
2. Enter the Number of Teeth:
4#
3. Calculate the Feed per Tooth:
F
F
F
will toggle through the inputs and outputs,
C
CUT
0.024
$
INCH/ReV
TeeTH
fPT 0.0060
TeeTH
CUT
0.024
$
INCH/ReV
U
'
G
ser
s
Uide
DISPLAy
0.
4.
$
INCH
$
4.
— 33