Calculated Industries MACHINIST CALC PRO User Manual page 13

radius — Enters or calculates a Radius. Unitless
g d
entries assumed millimeters in Metric mode;
Inches in U.S. mode. Calculates Radius given
entered Diameter.
Alpha — Enters alphabet character selection mode.
g 8
While in this mode, a letter can be selected and
used with
this mode with a unitless entry between 1 and 26
will display the corresponding letter of the alphabet
(i.e.
mode, presses of
alphabet, while presses of
Adjacent — Enters or calculates the Adjacent
a
(horizontal) leg of a right triangle. Calculates
Adjacent value given two other right-triangle
values. Also enters the Center x-coordinate of a
Bolt Pattern.
Opposite — Enters or calculates the Opposite
p
(vertical) leg or height of a right triangle. Calculates
Opposite value given two other right-triangle values.
Also enters the Center y-coordinate of a Bolt Pattern.
hypotenuse — Enters or calculates the Hypotenuse
h
(diagonal) of a right triangle. Calculates Hypotenuse
value given two other right-triangle values.
Angle — Enters or calculates an Angle, providing
n
the Adjacent Angle for both instances. Calculates
an Angle given two other right-triangle values. Also
enters the Starting Angle of the first hole of a Bolt
Pattern, with 0° being the three o'clock position and
the rotation going counterclockwise.
to enter a letter Drill Size. Entering
D
displays the letter e). While in Alpha
5g8
8
or toggle forward through the
+
toggle backward.
-
U ' G — 11
ser s Uide