Daikin FTXZ25NVM Operation Manual page 34

To change the default settings
No. Menu
INSTALLED
5
POSITION
< Note >
• Setting the room shape and installation position of the indoor unit in the remote controller will ensure proper control of the airfl ow
direction. Set oblong or horizontal according to the room shape.
• If you do not set the right corner and left corner correctly, the airfl ow direction may not be properly controlled in some airfl ow settings.
• The airfl ow direction range at the horizontal airfl ow setting (airfl ow direction that can be selected with
to the settings for the installation position.
< Setting guides >
When the distance is 2 to
50cm, set to the left corner.
RESET USED
6
POWER
< Note >
• This function resets the total power consumption.
• To check the power consumption, press
SOUND
7
VOLUME
< Note >
• This function sets the volume of the receiving tone of the indoor unit.
8
CONTRAST
< Note >
• This function sets the contrast of the LCD.
33
Setting
* Oblong centre
The horizontal airfl ow direction blows air evenly to the right and left.
Oblong right corner
The horizontal airfl ow direction blows air to the left.
Oblong left corner
The horizontal airfl ow direction blows air to the right.
Horizontal centre
The horizontal airfl ow direction blows air evenly to the right and left.
Horizontal right corner
The horizontal airfl ow direction blows air to the left.
Horizontal left corner
The horizontal airfl ow direction blows air to the right.
When the unit is installed in
the centre, set to centre.
RESET with
Resets the total power consumption to 0kWh.
APPLY
.
High The volume is high.
Low * Normal volume.
Off The volume is off.
• You can set the contrast between 1 and 5.
The default setting is "3".
1 to 5
• The higher the fi gure, the darker the indicator.
Description
When the distance is 2 to
50cm, set to the right corner.
) will change according
* Default setting