Daikin FTXZ25NVM Operation Manual page 33

No. Menu Setting
Focus
INTELLIG.EYE
1
AIRFLOW
Comfort *
< Note >
„ Focus
• The vertical airfl ow direction is adjusted so that the maximum airfl ow rate is achieved.
„ Comfort
• The unit blows air upward in the COOLING operation and downward in the HEATING operation.
1 HR *
AUTO OFF
2
time
3 HR
< Note >
• This function changes the set temperature +2°C in COOLING / –2°C in HEATING and the operation stops after the preset time
elapses if it is judged that no one is in the room.
• 3 minutes before the operation stops, the OPERATION lamp blinks to lower the airfl ow rate. After that, the operation stops.
• In this mode, the operation stops automatically. It is recommended to set the AUTO OFF operation to "Off" if a small child or a sick
person is in the room. (If a person does not move much, the sensor judges that no one is in the room and the air conditioner may
be stopped.)
• If the operation has been stopped by AUTO OFF operation, the LCD will not show "OFF."
Auto *
BREEZE
3
AIRFLOW
Low
< Note >
• This function sets the airfl ow rate when the vertical airfl ow direction is set to "BREEZE".
If you are disturbed by the unit's operating sound, set it to "Low".
On
CONTINUE
4
DRY
Off *
< Note >
• When the indoor temperature or humidity falls far below the preset value, the fans of indoor and outdoor units are stopped to keep
the room comfortable.
This operation is activated in the COOLING, "SARARA" DRY, and DRY COOLING operations.
• When the CONTINUE DRY is set to "On", starting the COOLING, "SARARA" DRY, or DRY COOLING operation triggers the
deodorising function which reduces any unpleasant odour coming from the indoor unit and the unit does not blow air for
40 seconds.
• Before the outdoor unit operates, the indoor temperature may be higher than the set temperature.
The INTELLIGENT EYE sensor detects an area where there is a person and adjusts the
horizontal airfl ow direction to blow air directly on the person.
The INTELLIGENT EYE sensor detects an area where there is a person and adjusts the
horizontal airfl ow direction to avoid blowing air directly on the person.
Sets the time for stopping the operation to after 1 hour or after 3 hours.
• This function is not activated during the following operations.
MOLD PROOF, QUICK HEATING TIMER and
CLEANING FILTER operation
Sets the BREEZE AIRFLOW rate to "Auto".
Sets the BREEZE AIRFLOW rate to "Low".
CONTINUE DRY operation is performed.
CONTINUE DRY operation is not performed.
Description
HEATING
COOLING
* Default setting
32