Sound Modes; Speaker Groups - Bang & Olufsen Beovision Harmony Series User Manual

2. Use the arrow buttons to select the Bang & Olufsen TV app and press the centre button.
3. Press or to select Sound & BeoLink... and press the centre button.
4. Press or to select Sound and press the button.
5. Press or to select a Speaker Groups and press the centre button.
6. Follow on-screen instructions.
Sound settings are preset from the factory to neutral values which suit most types of programmes. However,
if you wish, you can adjust these settings to your liking. Adjust sound settings such as volume, bass and
treble and, for wired speakers, enable eco mode. You can also look up information about the chosen sound
settings and reset the sound settings to default values. In the Sound menu you can also find the Speaker
connections menu, where you can set up both wired and wireless speakers.
For more about daily use of speaker groups, see the chapter 'USE SPEAKER GROUPS AND SOUND MODES'.
Your content provider may have prohibited distribution of digital wireless sound to your speakers. You must
then use wired Power Link connected speakers instead.
For advanced information about sound settings, see the Technical Sound Guide on the Bang & Olufsen
website www.bang-olufsen.com/guides

Sound modes

The Beovision Harmony has several sound modes optimised for different types of programmes and sources.
The sound modes are designed by sound engineers to suit all situations. However, if you wish, you can adjust
the values in the sound modes to your liking in the Sound modes menu. The sound modes have predefined
names. For example, use Movie when watching from a Blu-ray player or use Game to enhance the sound
when using a game console. The Custom sound mode can be set up if you wish to define a new type of use
and settings.
If you wish to reset a sound mode to default values, you must select RESET in the specific sound mode's
setup menu and confirm that you wish to reset the values.
You can bring up a list of sound modes on the Beoremote One display by finding Sound in the BeoRemote
One LIST menu and pressing the centre button. From here, you can select a desired sound mode.
For information about selecting a specific sound mode for a source, see the chapter 'SET UP CONNECTED
PRODUCTS'.

Speaker groups

In the Speaker Groups menu, you can make different speaker groups for different listening positions or
loudspeaker combinations. This means that you can use your speakers differently in different scenarios.