Table of Contents
Advertisement
You can also access the function if you press
Sound and Speaker Connections.
Scan for and associate wireless speakers ...
1. In the Speaker Connections menu, select RESCAN and press the centre button to rescan.
2. When the scanning has completed, press the centre button to associate the detected speakers with
the Beovision Harmony.
Disassociate a speaker from the Beovision Harmony ...
1. Press
or
to select a wireless speaker in the Speaker Connections menu and press the centre
button.
2. Press
or
to select DISCONNECT and press the centre button.
If the state of a speaker is missing in the Speaker Connections menu, the speaker has been associated with a
wireless channel, and will automatically be detected again when possible.
Set up wired and wireless speakers...
1. In the Speaker Connections menu, press
press the centre button and follow on-screen instructions.
If you connect additional speakers to the television, remember to add the speakers to your speaker groups.
Always open...
If you prefer for the position of the speakers to be static at all times, always open will keep the speakers in
an open position.
N E T W O R K S E T T I N G S
You can set up your Beovision Harmony to a network either with a wired or wireless connection. For the
most reliable network connection, Bang & Olufsen recommends making a wired connection. Bang & Olufsen
also recommends that you use a separate router and access point – a Network Link router – to ensure the
most reliable playback of digital files.
In some countries, it is not possible to set up a wireless connection, and you must use a wired connection.
W I R E D C O N N E C T I O N
1. Connect a LAN cable to the Soundcenter. Your Beovision Harmony is now connected to the network.
When you have a wired connection the Wireless Network Setup menu is unavailable.
, select the Bang & Olufsen TV App, then Sound & BeoLink...,
or
to select a PL socket or a wireless PL channel and
Advertisement
Table of Contents
