Table of Contents
Advertisement
Select CHECK FOR UPDATE and press the centre button, the Beovision Harmony should check for new
software. If any updates are available, press the centre button to start updating and follow on-screen
instructions.
While the Beovision Harmony is updating with new software, the standby indicator flashes red and the
Beovision Harmony should remain connected to the mains.
When updating is completed a short notification is shown on the top right corner of the screen.
To view the release notes...
1. Press
to bring up the Home menu.
2. Use the arrow buttons to select the Bang & Olufsen TV app and press the centre button.
3. Press
or
to select Sound & BeoLink... and press the centre button.
4. Press
or
to select Service and press the button.
5. Press
or
to select Software Update and select Release Notes and press the centre button.
Auto system updates
If you have a system setup with several Bang & Olufsen products, the entire system is updated when you
check for updates. You should enable automatic software update of the system in the TV menu. Available
software updates for all the Bang & Olufsen products in your setup will then be downloaded automatically
on a regular basis.*
*You can only enable or disable Automatic System Updates on the entire system and not on a single
product.
Pair your remote control
In the Remote Control Pairing menu, you can pair another Beoremote One with your Beovision Harmony.
1. In the Remote Control Pairing menu, press PAIR.
2. If the remote control is open for pairing, pairing takes place.
Unpair a remote...
1. In the Remote Control Pairing menu, highlight the device you wish to unpair and press the centre
button.
2. Highlight DELETE and press the centre button.
Activate a specific source from standby
Select a specific source to start up when you press the TV or MUSIC button respectively to switch on the
television from standby.
Advertisement
Table of Contents
