Advertisement
Quick Links
Advertisement
Related Manuals for BROSA Kip 3 Seater Sofa Bed
Summary of Contents for BROSA Kip 3 Seater Sofa Bed
- Page 1 ASSEMBLY GUIDE Kip 3 Seater Sofa Bed...
- Page 2 Components Upon unpacking your sofa bed from it’s delivery box, you should have one single component (the body of the sofa bed). Additional components are packed inside the body, you will learn how to access and utilise these components in the next steps. Sofa body Unpacking Follow the zip to the component compartment.
- Page 3 Pull the metal bars inside the compartment upward Step 1 until they are steady and then zip the bottom fabric back. Align a leg to the underside of the body so that Step 2 the bolt holes are overlapping. Insert the bolt into the hole and tighten with the allen key (B).
- Page 4 Step 3.1 Unzip the back fabric and pull the support legs Step 3 out. Step 3.2 Gently lift the sofa bed and place upright on a level surface. Step 3.1 Step 3.2 Align an arm to the side of the body. Insert the Step 4 connector on the arm into the conncector on the body and gently push the arm downward until it’s steady.
- Page 5 To change the back position from bed to sofa, rise the Step 5 back (step 5.1) then turn the supporting legs to hide inside the compartments (step 5.2). step 5.1 step 5.2 step 5.2 To change the back position from sofa to bed, take Step 6 out the supporting legs (step...
- Page 6 Enjoy your new sofa bed! Step 7...
Need help?
Do you have a question about the Kip 3 Seater Sofa Bed and is the answer not in the manual?
Questions and answers