Canon imageCLASS MF242dw User Manual page 193

Checking whether the settings are correct
Make sure that the Remote UI screen can be displayed with your computer (
a computer is not available, you can check the connection by using the operation panel (
Network Connection(P. 187) ).
Testing the Network Connection
1
Press .
2
Use / to select <Network Settings>, and press
● If a screen for entering a PIN is displayed, enter the PIN with the numeric keys and press
the System Manager PIN(P. 226)
3
Select <TCP/IP Settings>
4
Enter the IPv4 address of another device on the network, and press
● If a proper connection has been established, the result is displayed as shown above.
LINKS
Setting IPv6 Addresses(P. 188)
Viewing Network Settings(P. 191)
Network
<IPv4 Settings> <PING Command>.
187
Starting Remote UI(P. 269) ). If
Testing the
.
.
.
Setting