Table of Contents
Advertisement
Do not use tool without Danger Label on tool. If label is missing, damaged or unreadable, contact your SENCO
representative to obtain a new label at no cost.
WARNING
Tools shall not be modified without written approval of the manufacturer.
Use clamps or other practical ways to secure and support the workpiece to a stable platform. Holding the
work by hand or against your body is unstable and may lead to loss of control.
SAFETY WARNINGS
Keep hands and other body parts away from the area shown in the circle to avoid
possible injury during operation.
Tool Use
Read and understand tool labels and manual. Failure to follow warnings will result
in DEATH or SERIOUS INJURY.
Operators and others in work area MUST wear safety glasses with side shields.
Keep fingers AWAY from trigger when not driving fasteners, to avoid accidental
firing.
Choice of triggering method is important. See page 13-14 for triggering options.
Never point tool at yourself or others in work area.
Always point the tool away when connecting battery.
Do not alter or remove trigger or safety.
8
Advertisement
Table of Contents
