If These Indications Appear; Setting The Present Time - Tiger JBV-S10S Operating Instructions Manual

Symptom
There is a smell of plastic. Such smells may occur when the rice cooker is first used, but they should
go away over time as the rice cooker gets used.
There are stripes or waves on plastic Such stripes and waves are produced when the resin is being molded.
parts. They do not affect the performance of the rice cooker.
Food adheres to the lid during When cooking with ingredients that expand during heating, such as eggs
concurrent cooking. and the like, some of that may adhere to the lid. If it is bothersome, reduce
the amount of the ingredients.

If these indications appear

Display
"Err" appears on the display and a long- If the rice cooker still does not respond, there is problem with the unit
lasting or continuous beeping alarm itself. Disconnect the power plug and contact the place of purchase.
sounds.
Plastic parts
Plastic parts that come into contact with heat or steam will deteriorate over time. In this case, contact the
place of purchase.
38
Check point Action
Action

Setting the present time

Reference
page
–
The present time is displayed in a 24-hour format.
The time cannot be set during cooking, when the Keep Warm function is on, or when the Timer function is in
–
use.
22
„ Example: Changing the present time from "9:30" to "9:35"
1
Connect each end of the power
cord to the specified locations.
Reference
(1) Connect
page
–
2
Display the time setting mode.
Press the [Hour] or [Min] key to display
On
3
Set the present time.
Set the hour with the [Hour] key
and the minute with the [Min] key.
Hold down the corresponding key
to change the time more rapidly.
Appliance plug
4
Once you are finished setting
the time, press the [Menu] key.
The present time is set.
will go out and ":" will blink on the display.
(2) Connect
Power plug
• To cancel setting the time, press the
.
[KeepWarm/Cancel] key.
Blinks
39 39