Make the necessary adjustments, repairs, and part replacement if excessive wear of damage is discovered during
inspection.
PRE-HEATING SYSTEM
INSPECTION AND REPAIR
VISUAL CHECK
Check the main fuses and glow indicator for damage.
Replace the part(s) if required.
GLOW RELAY
The glow relay is located in the relay box the engine
compartment.
Use an ohmmeter to measure the resistance between
terminals No.2 and No.3.
If the measured value is outside the specified range, the
glow relay must be replaced.
Glow Relay Resistance
825R300046
GLOW PLUG
Use a circuit tester to test the glow plugs for continuity.
Glow Plug Resistance (Reference)
LNW21KSH001401
EGR SYSTEM 4JA1T (L)
Refer to 6F-9. (EGR system diagram)
ENGINE ELECTRICAL 6D – 33
94 − 114
Approximately 0.9
Ohms
Ohms