Isuzu 4JA1 Workshop Manual page 231

7. Rotor Assembly
1. Remove the rotor from front cover assembly.
Remove the front cover stator and rectifier.
RTW46DSH000301
8. Front Cover Assembly
1. Remove the front cover bearing retainer screws.
2. Remove the bearing.
RTW46DSH000701
9. Rear rotor bearing
•
10. Rectifier
1. Disconnect the stator coil leads between each rectifier
RTW46DSH000801
RTW46DSH000401
ENGINE ELECTRICAL 6D – 11
Re-use improper parts.
by melting the solder connection.
Hold the lead wire between the solder and the rectifier
with a pair of long nose pliers.
This will prevent heat transfer and resultant damage to
the rectifier.