Isuzu 4JA1 Workshop Manual page 250

6D – 30 ENGINE ELECTRICAL
Important Operations
1. Magnetic Switch Assembly
1. Attach the torsion spring to the hole in the magnetic
2. Insert the shift lever into the plunger hole of the
RTW46DSH005601
7. Gear Case
3,8. Dust Cover
1. Install the magnetic switch assembly in the gear case.
2. Install the dust cover.
Dust Cover Bolt Torque
RTW46DSH005701
10. Pinion Assembly
Apply a coat of grease to the reduction gear and install the
pinion assembly to the armature shaft.
065RY00041
21. Brush Holders
1. Install the brushes into the brush holder with raising
2. Install the brush holder with aligning the peripheries of
RTW46DSH004501
switch as illustrated.
magnetic switch.
8 (0.8/5.4)
the spring end of the brush spring.
Take care not to damage the commutator face.
the yoke and the brush holder.
N⋅m (kg⋅m/lb⋅ft)