Operating Your Wine Cabinet; Setting The Temperature - Caple WF1105 Instruction Manual

Freestanding wine cabinet
Table of Contents

Advertisement

Operating your wine cabinet and setting the temperature
The wine cabinet should be placed where the ambient temperature is between 16-32˚C. If the
ambient temperature is above or below this range, the performance of the unit may be affected. For
example, placing your unit in extreme cold or hot conditions may cause interior temperatures to
fluctuate and prevent it reaching the set temperature.
Control panel
RUN
Indicator light illuminates to signify the cooling mode is currently in operation.
Light
To switch the inner light, turn on/off.
Power
To switch this appliance on/off (press and hold this button for approximately 3 seconds)
"Set Upper" Button
To set the temperature of the upper chamber.
"Set Lower" Button
To set the temperature of the lower chamber.
"Upper"
Displays the temperature of the upper chamber.
"Lower"
Displays the temperature of the lower chamber.
Setting the Temperature Control
Each compartment of the wine cabinet (upper & lower) is independently controlled. To set the
temperature:
Connect the power cord to a properly grounded outlet. In the event of a power interruption, all
previous temperature settings are automatically erased and each compartment will default to a
preset temperature setting of: 7℃ for upper zone and 12℃ for lower zone.
● Set the desired cooling temperature by pressing the buttons adjacent to the "set upper/set lower"
indicator. Each depression of the buttons will scroll through the available temperature settings (for
each compartment) in increments of 1 degree. The temperature selected will flash in the LED
display for approximately 5 seconds, then revert back to display the set temperature of the cabinet.
Upper compartment: The temperature setting can be adjusted from 5℃to 18℃
Lower compartment: The temperature setting can be adjusted from 5℃to 18℃
NOTE: 

If the unit is unplugged, if power is lost, or turned-off, you must wait 3 to 5 minutes before restarting
the unit. If you attempt to restart before this time delay, the wine cabinet will not start.
5

Advertisement

Table of Contents
loading

Table of Contents