Parts Identifi Cation - Panasonic KM5070 Operating Instructions Manual

Parts Identifi cation
Scraper
Blender
Lid
Inner
Lid
Working
Capacity:
1.5 L
One scale
approx. 0.25 L
Blender
Jug (Glass)
Blender
Gasket
Blender
Cutting Blade
Blender
Jug Base
* The shape of the Plug may vary according to regions or countries.
The Safety Lock mechanism has been designed to prevent the appliance from switching ON when the appliance is
not properly in place.
Note:
• Do not push the Safety Lock Pin and any Safety Levers with any instrument such as stick.
• Do not pour liquids or ingredients at the Safety Lock Pin and Control Panel area.
• Keep the Safety Lock Pin and Safety Lever area clean to avoid foreign particles accumulating in the area.
Control Panel
* Use this function for intermittent operation until the required blending texture is obtained.
EN4
Blender
1500
1000
500
Safety Lock Pin
Safety Lever
1
ICE CRUSH
Off Speed 1 Speed 2
Dry Mill
Control Motor
Panel Housing
2 P1 P2
Pulse 1* Pulse 2*
(Low speed pulse) (High speed pulse)
Mill Container
Mill Gasket
Mill Cutting Blade
Mill Container Base
Cord Plug*