Installation; Installation Conditions; Dismensional Data - Gree FP-22LM/D-K Service Manual

4 Installation

4.1 Installation conditions

(1) There should be no direct sunlight.
(2) The hanger, ceiling and the building structure should be capable of supporting the weight of the
unit.
(3) The drain pipe can be easily led out.
(4) The inlet and outlet air flow will not be blocked.
(5) There should be no inflammable and explosive substances.
(6) There should be no corrosive gas, heavy dust, salt fog, smog or moisture.
• Use materials, equipment, finished products and semi-finished products in accordance with
applicable state or local codes. Firefighting products are verified by approval documents that are
granted by firefighting administrations. Do acceptance checks on these credentials with project
supervision authorities and keep essential records.
• Make sure that all equipment, tools, safety devices for electricals and fire fighting are all set.
• Install air conditioning units after the completion of upholding frameworks for buildings. Clean up
barriers in the field.
• Negotiate with engineering participants in charge of water systems, electricity and decoration on the
installation space specified in design drawings. Get an approval for installation work and complete
disclosure of technical tasks, quality and safety.

4.2 Dismensional data

B
Model
FP-22LM/D-K
FP-34LM/D-K
FP-51LM/D-K
FP-68LM/D-K
FP-85LM/D-K
FP-102LM/D-K
FP-119LM/D-K
FP-136LM/D-K
A
C
E
A
895
895
1050
1050
1050
1350
1350
1350
Unit Installation
Notice
D
B C
680 585
680 585
680 585
680 585
680 585
680 585
680 585
680 585
27
Outlet pipe size Rc3/4
Inlet pipe size Rc3/4
Drain pipe size φ22
D
230
230
230
230
230
230
230
230
Unit: mm
E
568
568
723
723
723
1023
1023
1023