Table of Contents
Advertisement
3 Installation
3.1 Installation Safety Precautions
Please read the instructions for use, installation and maintenance carefully
before use.
(1)
For the product to be installed, moved and repaired, please contact the local
technical service personnel and seek the support of professional institutions.
Otherwise, our company may not be able to assume the relevant legal liability
in case of any damage.
(2)
If the user uses self-prepared installation materials for installation, resulting in
pipeline leakage, crash, and bad installation affecting the normal operation
and use of the product, our company may not be able to assume the relevant
legal liability.
(3)
The unit adopts environment-friendly, colorless, odorless and flammable R32
refrigerant.
(4)
The room area for installation, operation and storage of combustible
refrigerant unit shall be larger than the specified space area.
(5)
Do not puncture or ignite the unit.
(6)
The relevant gas regulations of the country or region where the installation is
carried out shall be observed.
(7)
Avoid installing the unit in a narrow room to prevent the concentration of
refrigerant in the room from exceeding the limit value in case of refrigerant
leakage, resulting in hypoxia or suffocation.
(8)
Unless specially recommended by the manufacturer, do not use any method
to accelerate the defrosting process or clean the frosted part.
(9)
The unit shall be stored to prevent mechanical damage caused by accidents.
(10) The unit shall be stored in a room without continuous fire source (such as
open fire, ignited gas appliance, and open electric heater).
(11) Before maintenance or repair of heat pump unit using combustible refrigerant,
safety inspection must be carried out to ensure that the risk of fire is
minimized.
9
Heat Pump Pool Heater
Advertisement
Table of Contents
