Maintenance; Replacement Of Motor - Gree FP-22LM/D-K Service Manual

No. Symptoms
5 Water leaks.

3 Maintenance

3.1 Replacement of motor

(1) Open up the two display top covers. Loosen
screws on the left, right and top of the unit.
Lift up its decorated panels (on left or right
side) and remove them in a horizon direction.
Unit Installation
Possible causes
The condensate pipe is clogged.
The unit is not installed as required.
The environmental air humidity is too
high.
The fan stops but cold water is
supplied continuously.
The discharge valve is not tightened.
Clean the drain pipe.
Adjust the unit and let the unit keep
a certain inclination degree.
Do humidification and do not let the
high-temperature and high-humidity
air coming into the room.
Close the water dampers or run the
unit.
Tighten the discharge valve.
(2) Loosen screws to take away display bottom
covers.
(3) Loosen screws of the grille move it towards
right and then up.
38
Corrective measures
1