Tools - Gree FP-22LM/D-K Service Manual

3 Tools

No. Name
1 Hand-held electric drill
2 Cutter
3 Grinding machine
4 Electric Hammer
5 Percussion drill
Hand-held electric
6
shears
7 Rivet gun
Moreover, it is necessary to prepare commonly accessible tools including pipe pliers, screw drivers,
rubber pads, rubber hammers, scissors, spanners, level bars, measuring tape, angle square, glue guns,
brushes, ladders, pulleys.
Unit Installation
Usage
It is used for drilling holes at metals, wood or
plastics.
The fiber-reinforced sheet wheel can cut the
round or special shaped steel pipes, cast
iron pipes, channel steel and flat steel.
The fiber-reinforced line-shaped wheel
can grind metal pieces and cut sectional
materials. Before welding, a groove should
be made, and fins and burrs of the work
piece should be removed. Equipped with
the diamond cut sheet, it can cut the non-
metallic materials, like ceramic tiles, stones
etc. Equipped with the special wheel, it can
be used for cutting glass. Equipped with the
wire brush, it can be used for de-rusting.
Equipped with the rubber pad and sand
paper, it can be used for polishing.
Equipped with the rigid alloy drilling bit, it
is used for holes and grooves drilling and
dabbing at the concrete, the stone, bricks
etc.
There are two operating statuses for the
percussion drill. Under the slow mode, with
the auger bit, it can be used as the electric
drill. Under the slew and percussion state,
with the rigid alloy impact bit, it can be used
to drill holes at the bricks, concrete and
ceramic tiles.
It is used to cut the metal sheets, especially
for edge and angle trimming.
It is used for self-plugging rivets at different
structures, especially for single-side riveting
of the leak-proof structure.
26
Image