thomann Hitman HD-7 Sonic User Manual page 25

Using a drum pad as MIDI trigger
(Local Off)
Turning off all drum kit effects
Resetting triggers to factory defaults
Resetting drum kits to factory
defaults
3. Press [Enter] and use [ +] or [–] to select the desired MIDI channel (display
shows '0001' ... '016' , 'OFF' ).
4.
Press again [Enter] to save the selection. With [Back] to return to the previous
menu level without saving the settings.
By hitting a pad, external audio sources can be triggered via USB without the pad
itself being heard. This feature is called Local Off.
1. Press [Setup] to call up the menu for editing the settings. The display shows
'TRIG' .
2.
Press again [Setup], [ +] or [–] repeatedly until the display shows 'LOCL' .
3.
Press [Enter] and use [ +] or [–] to select either 'Off' or 'On' . The default setting
is 'On' . In the 'Off' setting, the pads are not addressed directly.
4.
Press [Enter] and use [ +] or [–] to select either 'Off' or 'On' . The default setting
is 'On' .
5. Press again [Enter] to save the selection. With [Back] to return to the previous
menu level without saving the settings.
Many drum kits include effects like reverb and chorus by default. They can be turned
off if e.g. external effects are to be fed in.
1. Press [Setup] to call up the menu for editing the settings. The display shows
'TRIG' .
2. Press again [Setup], [ +] or [–] repeatedly until the display shows 'EFCT' .
3. Press [Enter] and use [ +] or [–] to select either 'REVB' to turn the reverb effect
on or off, or 'CHRS' to turn the chorus effect on or off.
4.
Press again [Enter] to save the selection. With [Back] to return to the previous
menu level without saving the settings.
1. Press [Setup] to call up the menu for editing the settings. The display shows
'TRIG' .
2. Press again [Setup], [ +] or [–] repeatedly until the display shows 'RSET' .
3. Press again [Setup], [ +] or [–] repeatedly until the display shows 'TRGS' .
4. Press [Enter].
ð The display shows 'DONE' . The values for the parameter sensitivity 'SENS' ,
threshold 'THRS' , velocity curve 'CURV' and crosstalk 'XTLK' are reset to
factory defaults.
1. Press [Setup] to call up the menu for editing the settings. The display shows
'TRIG' .
2.
Press again [Setup], [ +] or [–] repeatedly until the display shows 'RSET' .
HD-7 Sonic
Operating
25