Receiving, Inspecting And Unpacking The Wine Guardian Unit; Receiving And Inspecting The Unit; Review The Packing Slip To Verify; Check The Unit For - Wine Guardian D050V Installation, Operation And Maintenance Manual

Receiving, Inspecting and Unpacking the Wine Guardian Unit

Receiving and Inspecting the Unit

NOTE: Wine Guardian units are factory assembled and tested prior to shipment.
Wine Guardian units are shipped in individual corrugated boxes.
✓ Lift at the designated handhold locations only or fully support from underneath. A
shipment may include one or more boxes containing accessories.
✓ Before opening the container, inspect the packing crates or boxes for obvious signs of
damage or mishandling.
✓ Write any discrepancy or visual damage on the bill of lading before signing.
✓ Inspect all equipment for any sign of damage caused during transit.
✓ Report all visual or concealed damage to the carrier and file a claim immediately.
✓ Thoroughly inspect the contents for any visible damage or loose parts.
If this procedure is not followed, the shipping company may reject the claim and
the consignee may suffer the loss. Do not return the shipment to the factory.

Review the Packing Slip to Verify

✓ Model number
✓ Factory installed options
✓ Unit accessories
If any items listed on the packing slip do not match your order information, contact the place
of purchase immediately.

Check the unit for

✓ An electrical power cord
✓ A thermostat with communications cable plugged into side of unit
✓ A drain line coming out of the unit
IMPORTANT
7