Sample serial plate
DO NOT:
✓ DO NOT MODIFY THE PLUGS IN ANY WAY!
✓ Do not use extension cords.
The electrical power supply must be either 115 volts or 230-volt AC, 1 phase, 60
cycle, depending on the model of the unit, and cannot vary more than
plus or minus 4% or damage may occur to the unit.
Plug the unit into the wall outlet. Gently pull on the plug to make sure it is tight.
Fig.1 Plug configurations
Required For:
Models D025, D050
-115VAC, 60Hz
-NEMA 5-15R
38
D025
IMPORTANT
-NEMA 6-15R (D088)
Required For:
Models D088, D200
-230VAC, 60Hz
-NEMA 6-20R (D200)