Standard Controller Functions
Humidity
Temperature
"Heat" symbol
Settings Area
How to:
Turn system on/off
Change temperature
Change humidity
Change Settings
Cooling/Heating/Auto
44
"Cool" symbol
On/Off (left side)
• Press the "On/Off" button once.
Note: There is a five (5) minute time delay
before cooling begins.
*** Green LED lit when unit is on
• Press the "Up" arrow once. The
temperature set point will be blinking on
the right side of the screen.
• Press the up or down arrow buttons to
adjust the temperature to the desired set
point.
• Press the "Up" arrow once. This display
will show the existing temperature setpoint.
• Press the "Settings" button once to display
the "Humidity" setpoint.
•
Press the "Up" or "Down" arrows to adjust
the humidity to the desired set point.
Note – a Wine Guardian humidifier must
be installed and Setting 6 set to "1" or
"2" before the controller will let you
change percent humidity.
• Press the Setting button once to display the
setting function at the bottom of the screen.
• Press the Settings button again to scroll
through settings for cool only, heat only or
heat/cool only – auto mode.
Up Button
Down Button
Settings button (right side)