Controller Set-Up Instructions - Wine Guardian 99H0174-00 Installation, Operation And Maintenance Manual

Controller Set-Up Instructions

Fig A
Fig B.
1. Locate the Wine Guardian
remote interface controller (Fig
B.) within the wine cellar or
proceed to the Wine Guardian
Local Interface Controller
main control panel. (Fig. A)
2. Press the Settings button and
hold it down for five (5)
seconds. The screen will
advance to the set up menu and
"1F" or "Setting #1" will
appear on the screen. (see
pictorial on p.18). For 50Hz
models, default will be "1C".
3. Continue to press the Settings
button to advance to setup
screen "6 0" or "Setting # 6".
(see pictorial p.19)
4. Press the up arrow to advance
this setting to either "2" for
Freestanding Humidifier or"1)
for Integrated Humidifier
(mounted at Wine Guardian
Unit. (same pictorial p.19)
5. Controller setup is complete.
17