Advertisement
Quick Links
Installation Guide – FUSION 1010 Generator
Fountain Crescent
Inchinnan Business Park
Inchinnan, PA4 9RE
Scotland, UK
FITTINGS KIT
T: +44 (0)141 812 8100
F: +44 (0)141 812 8200
W: www.peakscientific.com
E:
info@peakscientific.com
Part No. IG-FUSION 1010
Rev.
3
Page
Page 1 of 7
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Peak Scientific FUSION 1010
Summary of Contents for Peak Scientific FUSION 1010
- Page 1 Installation Guide – FUSION 1010 Generator FITTINGS KIT Fountain Crescent T: +44 (0)141 812 8100 Part No. IG-FUSION 1010 Inchinnan Business Park F: +44 (0)141 812 8200 Rev. Inchinnan, PA4 9RE W: www.peakscientific.com Scotland, UK info@peakscientific.com Page Page 1 of 7...
-
Page 2: Installation
Do not discard the transit brackets or screws as these will be needed again if the unit is to be transported from its current location. Fountain Crescent T: +44 (0)141 812 8100 Part No. IG-FUSION 1010 Inchinnan Business Park F: +44 (0)141 812 8200 Rev. - Page 3 PTFE tape is applied to the thread to ensure a leak-tight fit. Fountain Crescent T: +44 (0)141 812 8100 Part No. IG-FUSION 1010 Inchinnan Business Park F: +44 (0)141 812 8200 Rev. Inchinnan, PA4 9RE W: www.peakscientific.com...
- Page 4 230VAC 50/60Hz single phase power into the mains input at the rear of the supply generator. Fountain Crescent T: +44 (0)141 812 8100 Part No. IG-FUSION 1010 Inchinnan Business Park F: +44 (0)141 812 8200 Rev. Inchinnan, PA4 9RE W: www.peakscientific.com Scotland, UK info@peakscientific.com...
- Page 5 The Zero Air pressure should be application. allowed to dissipate before proceeding. Fountain Crescent T: +44 (0)141 812 8100 Part No. IG-FUSION 1010 Inchinnan Business Park F: +44 (0)141 812 8200 Rev. Inchinnan, PA4 9RE W: www.peakscientific.com Scotland, UK info@peakscientific.com...
- Page 6 Ensure all external fittings are leak tested. CONGRATULATIONS Your PEAK SCIENTIFIC gas generator is now fully installed, operational and ready to supply gas on demand to your instrument. General Notes * The generator will operate on voltages of 230VAC +/- 10%. This means it will operate between 207V and 253V.
-
Page 7: Product Warranty Registration
Peak Scientific of the generator location and installation date which will start the generator’s warranty period. If this form is not returned to Peak Scientific, then the Generator Warranty is for the lesser period, of twelve months from the date of delivery, or thirteen months from the date of dispatch from the factory.
Need help?
Do you have a question about the FUSION 1010 and is the answer not in the manual?
Questions and answers