Siemens SIMATIC S7-1500/ET 200МР Manual page 39

Configuring/address space
4.3 Manual operation (without technology object)
Additional information
You can find a detailed description of the counting and measurement functions and their
configuration in the following:
• Function manual Counting, Measurement and Position Detection available for download
on the Internet (http://support.automation.siemens.com/WW/view/en/59709820)
• Information system of STEP 7 (TIA Portal) under "Using technology functions > Counting,
measurement and position input > Counting, measurement and position input (S7-1500)"
Hardware Support Packages (HSP)
If you are using TIA Portal version V16, firmware versions ≤ V1.3 of the module (6ES7550-
1AA00-0AB0) are integrated. You can configure the module with the article number
6ES7550-1AA01-0AB0 as replacement part compatible with firmware version V1.3. You
integrate the firmware version V2.0 of the module (6ES7550-1AA01-0AB0) using HSP0332.
Firmware version V2.0 of the module is integrated into the following TIA Portal versions.
You can find the Hardware Support Packages (HSP) for download on the Internet
(https://support.industry.siemens.com/cs/ww/en/view/72341852).
You can also access this download from the menu bar of STEP 7 (TIA Portal): "Options >
Support packages > Download from the Internet".
GSD file
You can find the respective GSD file for the ET 200SP distributed I/O system for download on
the Internet:
• GSD file for PROFINET IO
(http://support.automation.siemens.com/WW/view/en/68189683)
• GSD file for PROFIBUS DP
(http://support.automation.siemens.com/WW/view/en/80206700)
38
Technology module TM Count 2x24V (6ES7550-1AA01-0AB0)
Equipment Manual, 12/2020, A5E31870371-AC