Preface - Siemens SIMATIC S7-1500/ET 200МР Manual

Preface

Purpose of the documentation
This manual includes module-specific information on wiring, diagnostics and the technical
specifications of the technology module.
General information regarding design and commissioning of the S7-1500 or ET 200MP is
available in the S7-1500 or ET 200MP system manuals.
The counting and measuring functions of the TM Count 2x24V technology module are
described in more detail in the Counting, Measurement and Position Detection
(http://support.automation.siemens.com/WW/view/en/59709820) Function Manual.
Conventions
Please observe notes marked as follows:
Note
A note contains important information on the product described in the documentation, on
the handling of the product and on the section of the documentation to which particular
attention should be paid.
Document history
The following table shows the most important changes to the documentation compared to
the previous edition.
Manual edition
12/2020
06/2018
06/2013
Technology module TM Count 2x24V (6ES7550-1AA01-0AB0)
Equipment Manual, 12/2020, A5E31870371-AC
Comments
The following sections have been revised:
• Product overview (Page 10)
• Wiring (Page 17)
• Configuring/address space (Page 22)
• Interrupts/diagnostic messages (Page 69)
• Technical specifications (Page 77)
The following sections have been revised:
• Product overview (Page 10)
• Configuring/address space (Page 22)
• Interrupts/diagnostic messages (Page 69)
• Parameter data record (Page 87)
First edition
3