Figure 3.26 Serial Port 3 Configuration
Serial Port 3 Configuration
–
Serial Port
"Enable or Disable" serial port 3.
–
Change Settings
Select an optimal setting for serial port 3.
–
Device Mode
When serial port 3 (connector COM3) is set to RS-232, RS-422, or RS-485
via jumper JSETCOM3, this BIOS item should be selected as its correspond-
ing one "RS-232 or RS-485 (Half Duplex) or RS-422 (Full Duplex)". Default
for this Device Mode is "RS-232".
51
AIMB-787 User Manual