Advertisement
8
8. Obtain the original of the carrier
inspection report and forward it along
with a copy of the noted delivery receipt
to Siemens at +1 (800) 347-6659 or +1
(919) 365-2200 outside the U.S.
Approval must be obtained by Siemens
from the carrier before any repair work
can be performed. Before approval can
be obtained, Siemens must have the
above referenced documents. The
carrier inspection report and/or driver's
signature on the delivery receipt does
not constitute approval to repair.
Note: Shipments are not released from the
factory without a clear bill of lading.
Approved methods are employed for
preparation, loading, blocking and tarping
of the equipment before it leaves the
Siemens factory. Any determination as to
whether the equipment was properly loaded
or properly prepared by shipper for over-the-
road travel cannot be made at the
destination. If the equipment is received in a
damaged condition, this damage to the
equipment has to have occurred while en
route due to conditions beyond Siemens
control. If the procedure outlined above is
not followed by the consignee, purchaser or
their agent, Siemens cannot be held liable
for repairs. Siemens will not be held liable
for repairs in any case where repair work
was performed prior to authorization from
Siemens.
Advertisement
