Advertisement
Panel LEDs are all flashing on/off
The FS control panel type is unknown to the
RCU. The RCU requires a panel map update.
Siemens can assist with providing the
correct panel mapping.
Panel LEDs turn on one-by-one across the
panel
The FS control panel firmware version is not
compatible with the firmware in the RCU.
Siemens can assist with providing the latest
panel firmware.
Fusesaver replacement
If a Fusesaver is replaced or any change
made to the Fusesaver line name, then the
RCU should be powered down and up again
so that it will search again and find the
changed installation.
Manufacturer's product liability
The manufacturer's product liability shall be
excluded if at least one of the following
criteria applies:
Original Siemens spare parts are not
used.
Fitters carrying out replacements have
not been trained and certified by
Siemens.
Parts have been incorrectly fitted or
adjusted.
Settings are not made in accordance
with Siemens specifications.
After installation and setting, no final
test is performed by a qualified person
including documentation of the test
results.
To keep documentation complete, it is
important that measurement results are
submitted to the local competent Siemens
office.
Disposal
The materials of the RCU should be recycled.
Disposal of the RCU with minimum
environmental impact is possible on the
basis of existing legal regulations.
The metal components can be recycled
as mixed scrap, although wide-ranging
dismantling into sorted scrap and mixed
scrap residues is more environmentally
sustainable.
Electronic scrap must be disposed of in
accordance with applicable regulations.
The RCU consists of the following materials:
Steel
Copper
Plastics
Rubber materials
Batteries
Electronic boards.
If the packaging is no longer needed, it can
be fully recycled.
Service
Contact Siemens customer service if you
require further information at +1 (800) 347-
6659 or +1 (919) 365-2200 outside the U.S.
63
Advertisement
