Advertisement
5. Click the "Search for RCU" button, RCU
Connect will scan for available RCUs,
and display each one in the box listed by
serial number, as shown in Figure 43.
6. Select a RCU from the list, RCU Connect
will attempt to connect to the RCU. After
a few seconds, if successful, the "Select
an RCU" button will become enabled.
The user can now click the "Select an
RCU" button and RCU Connect will
display the "Configure RCU" screen
shown in Figure 44.
Once RCU Connect and the RCU are
communicating the "Traffic" and "Live Data"
indicators shown at the bottom of Figure 43 will
provide a visual indication that communications is
in progress.
The Configure RCU menu allows the user
to perform the following tasks:
Fill in the configuration fields for a
RCU
Load a specific RCU configuration
that was previously saved
Save a specific RCU configuration
for later use
Send a configuration to a RCU.
7. When the "Configure RCU" menu is
shown, the data in the fields has been
retrieved from the configuration
template selected, which is shown in the
"Configuration" field at the top of the
screen. The user should then modify
each field to suit the specific RCU that is
being configured for deployment. For
example, if the RCU being configured
has an asset number of "98/AB665", and
an RCU data link address of "223", the
user will enter the data as shown in
Figure 44.
Figure 43: RCU Connect ‒ selecting an RCU
Figure 44: RCU Connect ‒ configure RCU window
47
Advertisement
