Advertisement
Designated usage
The RCU is used to connect the FS pole-
mounted or conductor-mounted circuit
breaker into a utility SCADA system. Any
other use is forbidden, unless the consent of
Siemens has been obtained.
Changes to any part of the RCU or its accessories,
that are carried out by the user or others, and not
previously agreed by Siemens, will void the war-
ranty of the whole product.
Compatibility
This version of the RCU operating
instructions is compatible with the following
firmware and software versions:
Application
Applicable versions
RCU firmware
RCU Connect
Table 1: Compatibility
Additional instructions
In addition to this manual, a protocol
manual detailing the configuration options
for each communications protocol is
available. The utility may also be supplied
with an RCU manual supplement which
details the type of radio fitted, the radio
cable and SCADA system protocol details
which are specifically engineered for that
utility (additional fees may be charged for
this configuration service). Finally, if the
RCU is fitted with a FS operator control
panel (MLFB or order code 3AX1350-8C),
the user will be supplied with a manual
detailing the function and maintenance of
the panel.
100
V1.4.0.0
5
Advertisement
