Advertisement
Figure 40: RCU Connect ‒ manage templates window
44
Managing templates
The manage templates menu can perform
the following tasks:
Change a template's default values
Create a new template based on an
existing one
Copy template files using Windows®
Explorer.
The user can manage templates by clicking
on the "Manage templates" button from the
main menu of RCU Connect. The user must
type "YES" into the challenge dialog box
shown in Figure 39 before RCU Connect will
allow further progress.
Figure 39: Challenge dialog box
If the user has no template files or no layout
files, the RCU Connect will prompt the user
to import the files. If RCU Connect cannot
find any layout files, or the user has more
than one layout file, RCU Connect will open
a file selection box allowing the user to
locate and select the desired layout file. A
layout file must be selected, or the user will
be returned to the main menu.
If RCU Connect cannot find any
configuration templates, or the user has
more than one configuration template, RCU
Connect will open a file-selection box
allowing the user to locate and select the
desired configuration template. A
configuration template must be selected, or
the user will be returned to the main menu.
After passing the challenge screen, the user
will see a screen similar to that shown in
Figure 40.
The configuration template currently in use
is shown in the box labelled "Configuration".
The layout file is displayed in the title bar of
the RCU Connect window.
Just below the "Configuration" box are the
configuration settings to be addressed for
each RCU site deployment.
On the right-hand side are a number of
buttons. Whether the "Edit Protocol
Mapping" button and the "Enable Challenge
Fields" button are visible is subject to the
users selections in the RCU configuration
template specification form (KMS-3100).
Changing and creating templates
Changing a template's default values, or
creating a new template based on another
are both accomplished by loading a
template, changing the data in the fields on
the screen, and saving the template.
1. Load the template that you wish to
change (or use as the base for the new
template) by clicking the "Load Config
Template" button and selecting the
required starting configuration file.
2. Change the values in the fields to the
desired values. If you have any
"Challenge" fields, you can enable them
for editing by clicking on the "Enable
Challenge Fields" button and satisfying
the challenge dialog box requirements.
Advertisement
